Video

Ref. # 140468

Age: 2006

Max.Size: 110 x 0 cm (43 x 0 inch)

Availability: Immediately

Description:
Bobst Mistral 110 A2

Bobst Mistral 110 A2 folder gluer
year 2005
6 Gluing points with HSS controller and 4 cold gluing nozzles
Technical Description:
FEEDER : total lenght 1320 mm, 8 Infeed conveyors with 30 mm belts, with 4 built-in mechanical vibrators, 1 Thickness gaugeWith lateral and longitudinal adjustment and upper introduction rollers, 1 Additional thickness gaugeWith lateral and longitudinal adjustment and upper introduction rollers, 2 Side lays in two partsWith right gauge equipped with a digital position indicatorAsymmetrical and adjustable longitudinallyMaximum height of the stack of die cut: 350 mm, 1 Gear-motorControlled by a frequency converter for feeding the infeed belts and switching on or off, 1 Series of adjustable rear guides mounted on a longitudinally adjustable carriage with pneumatic closure, 1 Lower right transporterWith 25 mm belts and 1 obliquely adjustable upper transport for perfect alignment of the die cuts, 1 Left Pre breaker positioned at 90°, Total lenght 2.300 mm, Lower left conveyor with 43 mm beltWith digital position indicator, 1 Lower right transporterWith 25 mm beltsWith digital position indicator, 1 Set of upper conveyors with 25mm belts and lifting device, 1 Left pre-break without belt with built-in presserAdjustable by eccentricMaxwidth of the gluing flap: 30 mm, 1 Reopening Guide, 1 Right pre-break with 30 mm strapIncludes a system to adjust the pre-break angle, 1 lower support guide, Total width 1500 mm, Lower conveyors with 25 mm beltsWith digital position indicator, Upper conveyors with longitudinal adjustment with 25 mm belt, Lower support guides, Set of hooks, bending propellers and guides, No1 bottom glue system on the left with disk and double scraperWith digital position indicator, 1 Removable glue tank, 1 Pressure guide with pressure roller, 1 Filling bottle, Total length 3000 mm, 2 Lower conveyors with 25 mm beltsWith digital position indicator, 1 Set of longitudinally adjustable upper conveyors with 25 mm belts and lifting device, 2 Folding equipment with 10/15/30 mm belts, 2 Pressure rollers adjustable by eccentrics, 2 speed variators for the folding belts, 2 Integrated devices for lifting the folding belts on the left and rightFor folding boxes with protruding flaps, 1 Lower support guide, Total lenght 1400 mm, 2 Lower conveyors with longitudinal adjustment with 25 mm beltWith digital position indicator, 2 Upper conveyors with longitudinal manual adjustment with 25 mm belt, 1 System for vertical adjustment of the lower and upper conveyor outputWith automatic belt tensioning system, 1 Flexible contact safety sensor, Total length 4425 mm., Pressure length 2700 mm., 1 Independent exit with belt, width 900 mm., 1 Pneumatic pressure system adjustable by spindles2 independent adjustment zones, 1 Automatic lateral correction guide system for the lower and upper belts, 1 Scale regulatorFor automatic stop of the exit in the event of interruption of the case arrival, 1 Command for temporary acceleration of the exit, 1 Command for independent start-up of the exit when the machine is stopped, 1 Gearmotor controlled by a frequency converterSpeed regulation according to the space between the dies, to maintain a regular scale pitch, B-5 PRE-BREAKING OR BENDING DEVICE, B-13 ADDITIONAL TOOLS FOR REINFORCED CRASH-LOCK BOTTOM, EA-6 MAIN GAUGE WITH LATERAL AND LONGITUDINAL ADJUSTMENT, EA-8 CALIBER BLADE WITH BLOWER, EA-15 ELECTRIC PILE VIBRATOR for the rear stack guidesIt favors the introduction of blanks adhering to each other, EA-80 LEFT ALIGNMENT CONVEYOR, FA-001 LOWER CENTRAL CONVEYORWith 25mm beltsIt ensures and facilitates the transport of disproportionate or large format boxes, F-5 UPPER CENTRAL CONVEYOR.With 25 mm beltsIt ensures and facilitates the transport of disproportionate or large format boxes, G-15 CENTRAL CONVEYORSWith digital position indicatorCentral lower and upper conveyors with 25 mm beltsThey ensure good central support for disproportionate or large format boxes, HB-6 MOTORIZATION OF CONVEYORSMotorized longitudinal adjustment of the left and right lower transport arms, J-1 LEFT AND RIGHT INTRODUCER30 mm belt introducerTo precisely control the formation of the scale, J-10 UPPER PRESSURE BELTThis accessory is essential for self-locking bottom and double-wall boxesTo exert additional pressure on a specific point on the box, J-15 MIRRORFor visual monitoring of the introduction of boxes at the delivery, J-025 LEFT AND RIGHT INTRODUCER AND RECTIFIER necessity of: J-001 To ensure good squaring of the corrugated cardboard self-bottom boxIt is composed of corrector pegs operated by pneumatic mandrels, K-3 KURANDT CODE READER COMPACT SERIESReading and checking the code printed on the gluing flap and checking the coloursIt is composed of a control box and a reading head, K-5 KURANDT LOWER GLUE TRACE DETECTOR COMPACT SERIESAllows you to check the presence and regularity of the trace of glue in the gluing flap, K-10 BOBST ROTARY EJECTOR with box advancement deviceFor the extraction of classic small and medium format boxes that do not comply with specifications, K-15 GLUE LEVEL CONTROL DEVICEIt ensures a constant glue level in the lower left gluer traycomposed of a probe and an automatic tray filling system
Online photos and videos:
https://photos.google.com/share/AF1QipMsAVCUdb8U3ABPQ7B4ttmGWzRQ7a1Z_SzMRC8luItQNQptz2WLFbZsf4WfK2i-Zg?key X1ZQcVlNSkhUVlJwcEo3MDlZYVhneHhkcElPemxR

Price: On Request

Please leave us message and we will get back to you soon.